Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Low Level Pressure Series 210-15:

0-500 to 0-25,000 PSIG

 

210-15 - Data Sheet

 

 

Excellent for use where space is confined. This transducer is small enough to tap directly into a pressure line, valve, manifold or similar pressure vessel.

 

It comes with convenient 8-32 stud-mounting pressure fitting and either a four pin electrical connector or four pin solder terminals. It's easy to mount and its low internal volume will have negligible effect on system performance.

 

The Series 210-15 is recommended for applications which require a less accurate measurement.

 

For applications requiring more accuracy, see the Series 210-10 transducer.

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

 

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 

210-15

 

Pressure

Pressure Range: 0 - 500 PSIG through 0 - 25,000 PSIG
Proof pressure: 150% of rated range
Burst pressure: 250% of rated range

                                                                 

Thermal Properties

Operating temperature range: -65°F to +200°F
Compensated Temperature Range: +25°F to +150°F
Thermal zero shift: 0.03% F.S. per °F max
Thermal sensitivity shift: 0.03% F.S. per °F max
   

Accuracy

Non-linearity and hysteresis combined: ± 0.50 % F.S. max. (best straight line method)
Repeatability: Within ± 0.1% F.S. max
 

Physical Properties

Pressure media: Any compatible with 303 CRES, 15-5 PH CRES, 2024-T351 AL, BUNA-N rubber
Weight: 1.5 ounces max
Pressure port: 8-32 UNC-2A threaded stud. Flared tube and pipe thread adapters are available.
Pressure seal: Our part no. 247-99-200-02 supplied with transducer.
   

Electrical

Excitation: 10 VDC
Input resistance: 350 ± 70 ohms
Output resistance: 350 ± 35 ohms
Output at zero pressure: 0 ± 10 % F.S.
Full scale (F.S.) sensitivity: 4.0 mV/V ± 10%
   

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V, PART I
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration

and acceleration shall be less than 0.01% of F.S. per G.

 

Electrical Connections

Pin A: (+) excitation
Pin B: (+) signal
Pin C: (-) signal
Pin D: (-) excitation

Mates with M4SLH1OC (Winchester) supplied with transducer. Both series
are available with hooked type solder terminals.

 

 

Translate to Spanish | Translate to French | Translate to Italian Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information