Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Low Pressure Series

210-20:

0-10 to 0-100 PSIA and PSIG

Excellent for use where space is confined. This moderately priced transducer series is hermetically sealed in an all welded stainless steel case.

The rugged unit is ideally suited for use on low pressure applications, and in dirty environments where reliability is important.

For applications requiring long term stability in dirty environments.
Wide range of pressure options.
Small size and rugged design.
Fully calibrated and environmentally tested

"Let's work together to design your next custom device"

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

Need Calibration Data?

We can provide you with a copy of your original data

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA 98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

210-20

Pressure

Pressure Range:	0 - 10 PSIG through 0 - 100 PSIA, PSIS
Proof pressure:	150% (or greater)* of rated range
Burst pressure:	300% (or greater)* of rated range

*Varies by model

Thermal Properties

Operating temperature range:	-65°F to +250°F
Compensated temperature range:	-25°F to +175°F
Thermal zero shift:	± 1.0% F.S.
Thermal sensitivity shift:	± 1.0% F.S.

Accuracy

Non-linearity and hysteresis combined:	± 0.25% F.S. max. (best straight line method)
Repeatability:	Within ± 0.10% F.S. max

Physical Properties

Pressure media:	Any compatible with 15-5 PH CRES
Weight:	4.5 ounces max
Pressure port:	Mates with fitting per MS33656-E4 using MS28775-012 size o-ring. Recommended installation torque 50 in-lb. max.
Pressure seal:	Mates with MS3116-10-6S, Paine Electronics P/N 247-99-100-02, mating connector, not supplied with unit.
Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA.

Electrical

Excitation:	10 VDC
Input resistance:	350 ± 50 ohms
Output resistance:	350 ± 50 ohms
Output at zero pressure:	0 ± 5.0% F.S.
Full scale (F.S.) sensitivity:	3.0 mV/V ± 10%

Environmental

Acceleration:	20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration:	20 G's per MIL-STD-810, METHOD 514.1, PROC. V
Shock:	30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than 0.03% of F.S. per G.

Electrical Connections

Pin A:	(+) excitation
Pin B:	(+) signal
Pin C:	(-) signal
Pin D:	(-) excitation
Pin E:	(no connection)

Translate to Spanish | Translate to French | Translate to Italian | Translate to German

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information