Low Level Series 210-35:0-2000 to 0-10,000 PSIA and PSIG, A very rugged transducer for use in all industrial applications where corrosive materials are present. This series features all welded, all stainless steel construction to provide a high degree of compatibility and system integrity. The series is available with either MS Bayonet lock connectors or hooked terminals. The Series 210-35 is recommended for applications which require highly accurate measurement. It is temperature compensated. For applications requiring less accuracy, see the Series 210-38 transducer. It's less expensive and not temperature compensated. Specifications Pressure | Pressure Range: | 0 - 2,000 PSIG through 0 - 10,000 PSIA, PSIS | | Proof pressure: | 150% of rated range | | Burst pressure: | 250% of rated range |
Thermal Properties | Operating temperature range: | -65°F to +250°F | | Compensated temperature range: | -25°F to +250°F | | Thermal zero shift: | .01% F.S. per °F max | | Thermal sensitivity shift: | .005% F.S. per °F max | | | |
Accuracy | Non-linearity and hysteresis combined: | ± .25 % F.S. max. (best straight line method) | | Repeatability: | Within ± .05% F.S. max | | |
Physical Properties | Pressure media: | Any compatible with 17-4 PH CRES, and 15-5 PH CRES | | Weight: | 1.5 ounces max | | Pressure port: | Available with either 1/8-27 NPT pipe thread or MS33656E4 (7/16-20 UNF 3A) pressure fittings. | | Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA. Available in either PSIA or PSIS (absolute or sealed) | | | |
Electrical | Excitation: | 10 VDC | | Input resistance: | 350 ± 70 ohms | | Output resistance: | 350 ± 35 ohms | | Output at zero pressure: | 0 ± 5 % F.S. | | Full scale (F.S.) sensitivity: | 2.5 mV/V ± 10% | | | |
Environmental | Acceleration: | 20 G's per MIL-STD-810, METHOD 513.1, PROC. I | | Vibration: | 20 G's per MIL-STD-810, METHOD 514.1, PROC. V | | Shock: | 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV |
Error due to combined effect of shock, vibration, and acceleration shall be less
than .01% of F.S. per G. Electrical Connections | Pin A: | (+) excitation | | Pin B: | (+) signal | | Pin C: | (-) signal | | Pin D: | (-) excitation | | Pin E: | (no connection) |
Series available with either connector or hooked type solder terminals. Mating connectors are not supplied with the transducers. For connector version the mating connector recommended is Bendix PTO6A-8-4S-(SR) or equivalent. Our part no. 274-99-100-01. | 
