Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Low Pressure High Temperature Series

210-40:

0 - 2,000 PSIA through

0 - 10,000 PSIA

 

210-40 - Data Sheet

 

 

For applications in high temperature environments or where radiation is present.

 

The series 210-40 is a bonded strain gage transducer designed for applications up to 400°F.

 

Small and lightweight to provide flexibility for a wide range of applications.

 

The series 210-40 is available either in a connector version or with crimp-on electrical pin terminals.

  • Wide range of pressure options.

  • Small size and compact design.

  • Hermetically sealed all welded construction.

  • Fully calibrated and environmentally tested

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

(Select image for larger view)

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 
210-40

 

Pressure

Pressure Range: 0 - 2,000 PSIG through 0 - 10,000 PSIA, PSIS
Proof pressure: 150% of rated range
Burst pressure: 250% of rated range

                                                                 

Thermal Properties

Operating temperature range: -65°F to +400°F
Compensated temperature range: -25°F to +400°F
Thermal zero shift: 0.01% F.S. per °F max
Thermal sensitivity shift: 0.01% F.S. per °F max
   

Accuracy

Non-linearity and hysteresis combined: ± 0.50 % F.S. max. (best straight line method)
Repeatability: Within ± 0.1% F.S. max
 

Physical Properties

Pressure media: Any compatible with 17-4 PH CRES, and 15-5 PH CRES
Weight: 1.4 ounces max
Pressure port: Per MS33656E4 (7/16- 20UNF3A)
Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA.
   

Electrical

Excitation: 10 VDC
Input resistance: 350 ± 70 ohms
Output resistance: 350 ± 35 ohms
Output at zero pressure: 0 ± 5 % F.S.
Full scale (F.S.) sensitivity: 2.5 mV/V ± 10%
   

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than 0.01% of F.S. per G.

 

Electrical Connections

Pin A: (+) excitation
Pin B: (+) signal
Pin C: (-) signal
Pin D: (-) excitation

Mates with MS3116-8-4S (Bendix PTO6A-8-4S-(SR)) or equivalent. Our part no 247-99-100-01 (250°F max. service only). Mating connector not supplied with transducer. Also available with straight pin terminal for crimp on connection.

 

 

Translate to Spanish | Translate to French | Translate to Italian |  Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information