Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Differential Series

210-62:

± 5 to ± 500 PSID

 

A true wet-wet, high line, low differential pressure transducer for use with line pressures up to 5,000 PSI.  The 210-62 series is a rugged, all-stainless steel transducer which features a single sensing element with isolation diaphragms. This means that, on both the high and low side, stainless steel is presented to the pressure medium.

 

The 210-62 can be used for both bi-directional and uni-directional operation.

  • Wide range of pressure options.

  • Rugged stainless steel design for extreme environments.

  • Bi-Directional or Uni-Directional

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

Need Calibration Data?

We can provide you with a copy of your original data

 

 

Contact us today!

 

 

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 
210-62

 

Pressure

Pressure Range: ± 5 to ± 500 PSID
Proof pressure: 150% of rated range
Burst pressure: 500% of rated range
Maximum line pressure: 2,500 PSIG and 5,000 PSIG

                                                                 

Thermal Properties

Operating temperature range: -65°F to +200°F
Compensated temperature range: 0°F to +200°F
Thermal zero shift: 0.015% F.S. per °F max
Thermal sensitivity shift: 0.01% F.S. per °F max
   

Accuracy

Nonlinearity and hysteresis combines: ± 0.50% F.S. max. on pressures of 20 PSI and above, 0.75% F.S. max below 20 PSI (best straight line method) each port separately
Repeatability: Within ± 0.1% F.S. max
 

Physical Properties

Pressure media: Any compatible with 304 series CRES
Weight: 47 ounces max
Pressure port: Per MS33649-4 mates with MS33656-E4 (7/16-20UNF3A) using a MS28775-012 size o-ring. Pressure port adapters available.
   

Electrical

Excitation: 10 VDC
Input resistance: 370 ± 74 ohms
Output resistance: 350 ± 18 ohms
Output at zero pressure: 0 ± 5 % F.S.
Full scale (F.S.) sensitivity: P1 = 3 mV/V ± 10%
P2 = P1 ± 5% of P1
   

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V PART I
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

The combined effect of shock, vibration, and acceleration will not damage this unit.

 

Electrical Connections

Pin A: (+) excitation
Pin B*: (+) signal
Pin C*: (-) signal
Pin D: (-) excitation
Pin E: (no connection)
Pin F: (no connection)

Mates with MS3116-10-6S (Bendix PT06A-10-6S-(SR)) or equivalent. Our part no. 247-99-100-02. Mating connector not supplied with transducer.
 

*Polarity as shown when pressure at P1 is greater than pressure at P2.

 

Translate to Spanish | Translate to French | Translate to Italian |  Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information