Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Aerospace Series

210-90:

0 - 75 through 0 - 5,000

PSIA and PSIS

This 210-90 series transducer utilizes a flush diaphragm to handle applications that require frequent flushing or cleaning.

Applications using a thick slurry pressure media are also ideally suited for this flush mount transducer. It's the perfect choice when size and weight is critical.

Wide range of pressure options.
Small size and compact design.
Hermetically sealed all welded construction.
Fully calibrated and environmentally tested

"Let's work together to design your next custom device"

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

Need Calibration Data?

We can provide you with a copy of your original data

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA 98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

210-90

Pressure

Pressure Range:	0 - 75 through 0 - 5,000 PSIA and PSIS
Proof pressure:	150% of rated range
Burst pressure:	300% of rated range

Thermal Properties

Operating temperature range:	-65°F to +250°F
Compensated temperature range:	-25°F to +250°F
Thermal zero shift:	0.01% F.S. per °F max
Thermal sensitivity shift:	0.01% F.S. per °F max

Accuracy

Non-linearity and hysteresis combined:	± 0.25 % F.S. max. (best straight line method)
Repeatability:	Within ± 0.10% F.S. max

Physical Properties

Pressure media:	Any compatible with 15-5 PH CRES
Weight:	4.5 ounces max

Electrical

Excitation:	10 VDC
Input resistance:	350 ± 70 ohms
Output resistance:	350 ± 35 ohms
Output at zero pressure:	0 ± 5 % F.S.
Full scale (F.S.) sensitivity:	3.0 mV/V ± 10%

Environmental

Acceleration:	20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration:	20 G's per MIL-STD-810, METHOD 514.1, PROC. V, PART 1
Shock:	30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than 0.01% of F.S. per G.

Electrical Connections

Pin A:	(+) excitation
Pin B:	(+) signal
Pin C:	(-) signal
Pin D:	(-) excitation

Translate to Spanish | Translate to French | Translate to Italian | Translate to German

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information