Bi-Directional Differential Amplified Transducer Series: 212-600-500 - 0-5,000 PSID The differential pressure transducer Series 212-60 offers pressure ranges from 500 - 5,000 PSID and many other features such as output from input isolation for trouble free circuit interface, input reverse polarity protection, output short circuit protection and all-welded, stainless steel construction for high sensor reliability in the toughest environments.
Available in a wide selection of pressure ranges, many models can be modified to meet your specific pressure sensor design and application requirements. Most Series 212-60 pressure/temperature transducer models are available with optional features, including specific pressure ranges, voltage inputs, electrical connections, pressure ports, special testing and thermal compensation. Please use the data sheet link below for specifications on this temperature sensor line.
"Let's work together to design your next device" 
Custom Request: Need something new? If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100. | 
(Select image for larger view) | 
Paine Electronics, LLC 5545 Nelpar Drive East Wenatchee, WA 98802 Telephone: 509-881-2100 Fax: 509-881-2115 moreinfo@paineelectronics.com  |
Pressure Data | | Pressure Range: | 0-500 to 0-5,000 PSID | | Proof Pressure: | 150% of rated pressure (line and differential) | | Burst Pressure: | 200 % of rated pressure (line and differential) |
Thermal Properties | | Operating Temperature Range: | -65°F to +175°F | | Compensated Temperature Range: | -25°F to +175°F | | Thermal zero shift: | 0.01% F.S. per °F max | | Thermal sensitivity shift: | 0.01% F.S. per °F max |
Accuracy | | Static Error Band Including Nonlinearity, Hysteresis and Thermal Effects: | ± 0.25% F.S. max. | | Repeatability: | ± 0.10% F.S. |
Physical Properties | | Pressure Media: | Any compatible with 304 CRES, 15-5 PH Cres and Buna-N-Rubber. | | Pressure Port: | Mates with fitting end per MS33656-E4 using MS28775-012 O-ring. | | Weight: | 13.0 ounces Max | Alternate pressure ports are available upon request. Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA. |
Electrical | | Input Power: | 28 ± 4 Vdc | | Input Current: | 40 mA Max | | Output Current: | 1.0 mA Max (Short circuit protected) | | Output at zero pressure: | 0 ± 0.10 Vdc = Eo | | Full scale (F.S.) Output: | +10 ± 0.10 Vdc = Ep (P1>P2) or -(Ep-2Eo) ± 0.10 Vdc (P2>P1) | | Input/Output Isolation | 100 Mohms min at 50 Vdc | | Output Impedance | 10 ohms typical with 10k load (Short circuit protected) | | Output Noise | 10 mV P-P to 10 kHz |
|
Environmental | | Acceleration: | 20 G's per MIL-STD-810, METHOD 513.1, PROC. I | | Vibration: | 20 G's per MIL-STD-810, METHOD 514.1, PROC. V | | Shock: | 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV | | | |
| |
Error due to combined effect of shock, vibration, and acceleration shall be less than 0.01% of F.S. per G. Electrical Connections | | Pin A: | (+) Input | | Pin B: | (+) Output | | Pin C: | (-) Output return | | Pin D: | (-) Input Return return | | Pin E: | | | PIN F: | |
|
|
|
