Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Aerospace Series

210-90

0-50 to 0-6,000 PSIA and PSIS. 

 

This transducer utilizes a flush diaphragm to handle applications that require frequent flushing or cleaning. Applications using a thick slurry pressure media are also ideally suited for this flush mount transducer. It's the perfect choice when size and weight is critical.

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

 

Need Calibration Data?

We can provide you with a copy of your original data

 

 

Contact us today!

 

 

The model shown is non-amplified. The amplified version will increase the overall length by approximately 0.5 inches.

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 
212-90

 

Pressure

Pressure Range: ± 50 to ± 6,000 PSIA
Proof pressure: 150% of rated range
Burst pressure: 300% - 500% of rated range

                                                                 

Thermal Properties

Operating temperature range: -40°F to +200°F
Compensated temperature range: -25°F to +200°F
Thermal zero shift: 0.01% F.S. per °F max
Thermal sensitivity shift: 0.01% F.S. per °F max
   

Accuracy

Nonlinearity and hysteresis combines: ± 0.5% F.S. max (best straight line method)
Repeatability: Within ± 0.25% F.S. max
 

Physical Properties

Pressure media: Any compatible with 15-5 PH CRES
Weight: 4.0 ounces max
   

Electrical

Input power: 12-40 VDC
Input current: 25 mA max
Output current: 1.0 mA max (short circuit protected)
Output at zero pressure: 0.1 ± 0.1 Vdc
Output at rated pressure: 5.0 ± 0.1 Vdc
Input/Output isolation: Not isolated
Insulation resistance: All pins together to case 100 Mohms min at 50 Vdc

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V PART I
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than 0.01% of F.S. per G.

Electrical Connections

Pin A: (+) Input
Pin B: (+) Output
Pin C: Output Return (Internally connected)
Pin D: Input Return (Internally connected)
Pin E: (no connection)
Pin F: (no connection)

 

 

 

Translate to Spanish | Translate to French | Translate to Italian |  Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information