Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

Automotive Series 212-A:

Isolated & Non-Isolated

0 - 50 through 0 - 10,000

PSIA and PSIS

 

This 212 Automotive series can be used to measure hydraulic, cooling, pneumatic, lubrication, air conditioning and fuel system pressures.

 

These rugged, lightweight transducers are specifically designed for use in over-the-road and off-road vehicles. They're significantly smaller than anything available on the market and feature all-welded, all-stainless steel construction. They stand up to rugged environmental conditions.

 

By operating off standard automotive power you eliminate the need for a power supply. Since the 212 series has its own internal voltage regulator, it's unaffected by input voltage fluctuations.

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

 

 

 

Need Calibration Data?

We can provide you with a copy of your original data

 

 

Contact us today!

 

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 

212-A

 

Pressure

Pressure Range: 0 - 50 through 0 - 10,000 PSIA and PSIS
Proof pressure: 150% of rated range
Burst pressure: 250% of rated range

                                                                 

Thermal Properties

Operating temperature range: -30°F to +160°F
Compensated temperature range: +30°F to +130°F
Thermal zero shift: .02% F.S. per °F max
Thermal sensitivity shift: .01% F.S. per °F max
   

Accuracy

Static error band ± 0.5 % F.S. max. (best straight line method)
 

Physical Properties

Pressure media: Any compatible with 17-4 PH and 15-5 PH CRES
Weight: 8 ounces max
Pressure port: Per MS33649-4 mates with MS33656-E4 (7/16-20UNF3A) using a MS28775-012 size o-ring. Pressure port adapter available.
Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA.
   

Electrical

Input power: 10.5 to 18 VDC, reverse polarity protected.
Input current: 50 mA, max.
Output current: 1.0 mA, max. (short circuit protected)
Output at zero pressure: 0 ± 0.05 VDC
Output at rated pressure: 3 ± 0.05 VDC.
Input/output isolation: Input/output is not isolated
   

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V, PART I
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than .02% of F.S. per G.

 

Electrical Connections

Pin A: (+) excitation
Pin B: (+) signal
Pin C: signal return
Pin D: excitation
Pin E: (no connection)
PIN F: (No connection)

Mates with MS3116-10-6S (Bendix PT06A-10-6S-(SR)) or equivalent. Our part no. 247-99-100-02. Mating connector supplied with transducer.

 

 

Translate to Spanish | Translate to French | Translate to Italian Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information