Custom, Precision Pressure Instrumentation: Pressure Transducers, Transmitters & Temperature Probes

From satellites in outer space, oceanographic equipment submerged under miles of sea water to oil well data logging systems thousands of feet below the earth's surface, Paine Electronics custom pressure instrumentation has been utilized to operate flawlessly in the toughest environments.

High Level Series 212-I:

Isolated & Non-Isolated

0 - 5 through 0 - 10,000

PSIA and PSIS

  

The series 212 is a rugged, lightweight, all stainless steel, welded pressure transducer ideally suited for harsh industrial environments.

 

The isolated version features input/output isolation which decouples any interplay between power and signal, allowing flexibility in signal and power grounding connections. This also protects the transducer against output short circuits.

 

The non-isolated version provides a floating output and is ideally suited for pressure monitoring where direct meter readout is required. Both versions utilize hybrid microelectronic amplifier modules rated to 275° F.

 

"Let's work together to design your next custom device"

 

 

Custom Request:

Need something new? Most of Paine's products are custom made to fit individual requirements. If you cannot find a product to match your current and/or future requirements, please contact us today at 509-881-2100.

 

\

 

 

Paine Electronics, LLC

5545 Nelpar Drive

East Wenatchee, WA  98802

Telephone: 509-881-2100

Fax: 509-881-2115

moreinfo@paineelectronics.com

 

 
212-I

 

Pressure

Pressure Range: 0 - 10 through 0 - 10,000 PSIA and PSIS
Proof pressure: 150% of rated range
Burst pressure: 250% of rated range

                                                                 

Thermal Properties

Operating temperature range: -65°F to +275°F
Compensated temperature range: -25°F to +275°F
Thermal zero shift: .01% F.S. per °F max
Thermal sensitivity shift: .01% F.S. per °F max
   

Accuracy

Non-linearity and hysteresis combined: ± .25 % F.S. max. (best straight line method)
Repeatability: Within ± .10% F.S. max
 

Physical Properties

Pressure media: Any compatible with 17-4 PH CRES, and 15-5 PH CRES
Weight: 8 ounces max
Pressure port: Per MS33649-4 mates with MS33656-E4 (7/16-20UNF3A) using a MS28775-012 size o-ring. Pressure port adapter available.
Transducers designated PSIS have sealed reference chambers. The voltage output is referenced to 14.696 PSIA.
   

Electrical

Input power: 28 ± 3 VDC, reverse polarity protected
Input current: 50 mA, max.
Output current: 2.5 mA, max. (short circuit protectect)
Output at zero pressure 0 ± 0.05 VDC
Output at rated pressure: 5.0 ± 0.05 VDC
Input/output isolation: Input/output is not isolated
   

Environmental

Acceleration: 20 G's per MIL-STD-810, METHOD 513.1, PROC. I
Vibration: 20 G's per MIL-STD-810, METHOD 514.1, PROC. V, PART 1
Shock: 30 G's per MIL-STD-810, METHOD 516.1, PROC. IV

Error due to combined effect of shock, vibration, and acceleration shall be less
than .01% of F.S. per G on 500 PSI and above, and .02% of FS. per G below 500 PSI..

 

Electrical Connections

Pin A: (+) input
Pin B: (+) output
Pin C: output return
Pin D: input return
Pin E: (no connection)
Pin F: (no connection)

Mates with MS3116-10-6S (Bendix PT06A-10-6S-(SR)) or equivalent. Our part no. 247-99-100-02. Mating connector not supplied with transducer.

 

 

Translate to Spanish | Translate to French | Translate to Italian |  Translate to German

© Copyright Paine Electronics, LLC. All rights reserved.  Privacy Statement  Click Here to Make Paine Your Home Page

Logos & other trademarks used herein are the property of their respective owners | Agreement & Use of Paine Product Information